The 1060 H12 H14 Aluminum plate is a type of Aluminum Alloy Plate that is commonly used in various industries such as construction, transportation, and electronics. It is made of 99.6% aluminum and has excellent corrosion resistance, high thermal conductivity, and good workability. The H12 and H14 temper designations indicate that the plate has been strain hardened and partially annealed, respectively. This makes the plate more durable and less prone to deformation during processing. The 1060 H12 H14 aluminum plate is often used for roofing, insulation, and decorative purposes due to its lightweight and corrosion-resistant properties.
Aluminium sheet and aluminum plate can be applied to a variety of applications, including automotive, construction, furniture, appliances, and more. We offer aluminum sheet for sale from a thickness of 0.016" up to 9" thick.
Our custom cut-to-size aluminum sheet and plate is available in these alloys: 1100 | 2024 | 3003 | Anodized 5005 | 5052 | 5086 | 6061 | 6063 | 7050 | 7075 and MIC-6 Plate Cast
| No. | Alloy States | |
| Chemical composition.% | |
| Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | | Ti | Zr | Other | AI | |
| | Single | Total | |
| 1 | 3003 | 0.6 | 0.7 | 0.05-0.20 | 1.0-1.5 | - | - | - | 0.1 | - | - | - | 0.05 | 0.15 | Rem | - | |
| 2 | 4032 | 11.0-13.5 | 1 | 0.50-1.30 | - | 0.8-1.3 | 0.1 | 0.50-1.30 | 0.25 | - | - | - | 0.05 | 0.15 | Rem | - | |
| 3 | 4043 | 4.5-6.0 | 0.8 | 0.3 | 0.05 | 0.05 | - | - | 0.1 | - | 0.2 | - | 0.05 | 0.15 | Rem | - | |
| 4 | 4047 | 11.0-13.0 | 0.8 | 0.3 | 0.15 | 0.1 | - | - | 0.2 | - | - | - | 0.05 | 0.15 | Rem | - | |
| 5 | 5052 | 0.25 | 0.4 | 0.1 | 0.1 | 2.2-2.8 | 0.15-0.35 | - | 0.1 | - | - | - | 0.05 | 0.15 | Rem | - | |
| 6 | 5754 | 0.4 | 0.4 | 0.1 | 0.5 | 2.6-3.6 | 0.3 | - | 0.2 | Mn+Cr:0.1-0.6 | 0.15 | - | 0.05 | 0.15 | Rem | - | |
| 7 | 5182 | 0.2 | 0.35 | 0.15 | 0.20-0.50 | 4.0-5.0 | 0.1 | - | 0.25 | - | 0.1 | - | 0.05 | 0.15 | Rem | - | |
| 8 | 5083 | 0.4 | 0.4 | 0.1 | 0.40-1.0 | 4.0-4.9 | 0.05-0.25 | - | 0.25 | - | 0.15 | - | 0.05 | 0.15 | Rem | LF4 | |
| 9 | 6061 | 0.40-0.8 | 0.7 | 0.15-0.40 | 0.15 | 0.8-1.2 | 0.04-0.35 | - | 0.25 | - | 0.15 | - | 0.05 | 0.15 | Rem | LD30 | |
| Alloy States | Thickness (mm) | Tensile strenght (Rm/Mpa) | Yield Strength (Rp0.2 Mpa) | Elongation A50(%) | Bending Radius |
| 5052 H32 | >0.20-0.50 | 210-260 | 130 | 5 | 0.5t |
| >0.50-1.50 | 6 | 1.0t |
| >1.50-3.00 | 7 | 1.5t |
| >3.00-6.00 | 10 | 1.5t |
| 5052 H34 | >0.20-0.50 | 230-280 | 150 | 4 | 0.5t |
| >0.50-1.50 | 5 | 1.5t |
| >1.50-3.00 | 6 | 2.0t |
| >3.00-6.00 | 7 | 2.5t |
| 5052 H36 | >0.20-0.50 | 250-300 | 180 | 3 | 1.5t |
| >0.50-1.50 | 4 | 2.0t |
| >1.50-3.00 | 5 | 3.0t |
| >3.00-6.00 | 6 | 3.5t |
| 5052 H38 | >0.20-0.50 | 270 | 210 | 3 | - |
| >0.50-1.50 | 3 | - |
| >1.50-3.00 | 4 | - |
Contact Now
