Cost Price 1050 Aluminum Coil
Get Latest PricePayment Type: | L/C,T/T |
Incoterm: | FOB,CFR,CIF,EXW |
Min. Order: | 5 Ton |
Transportation: | Ocean |
Port: | Tianjin Port,Qingdao Port,Shanghai Port |
Payment Type: | L/C,T/T |
Incoterm: | FOB,CFR,CIF,EXW |
Min. Order: | 5 Ton |
Transportation: | Ocean |
Port: | Tianjin Port,Qingdao Port,Shanghai Port |
Place Of Origin: China
Whether Alloy: Is Alloy
Material: 1000 Series
Surface Treatment: Coated
Annealed State: O - H112
Tolerance: ±1%
Processing Service: Bending, Decoiling, Welding, Punching, Cutting
Model NO.: 1 series, 1050
Surface Treatment: Powder Coating
Technique: Cold Drawn
Customized: Yes
Application: Transportation Tools, Door & Window, Glass Wall, Heat Sink, Decorations
Selling Units | : | Ton |
Package Type | : | Wood Package, Transportion by Container |
The file is encrypted. Please fill in the following information to continue accessing it
1050 Aluminium Coil is commonly used in some places that require high corrosion resistance and formability but not high strength. 1050 Aluminum Coil is also industrial aluminum. For example, A typical application is the manufacture of chemical industry containers. In addition,1050 aluminum alloy is used for lithium battery soft connection, pole material, explosion-proof valve, PS board base, heat sink, signage, lamp, reflector, etc.
All in all, 1000 series Aluminum Alloy Coil has Less Tensile strength/ higher Al content/less other alloy. 1000 series aluminum coil is mainly used for signs, billboards, wall decoration, kitchen utensils, chemical equipment, electronic devices and other products that do not require high strength.
No. | Alloy States | |||||||||||||||
Chemical composition.% | ||||||||||||||||
Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn |
| Ti | Zr | Other | AI | ||||
| Single | Total | ||||||||||||||
1 | 3003 | 0.6 | 0.7 | 0.05-0.20 | 1.0-1.5 | - | - | - | 0.1 | - | - | - | 0.05 | 0.15 | Rem | - |
2 | 4032 | 11.0-13.5 | 1 | 0.50-1.30 | - | 0.8-1.3 | 0.1 | 0.50-1.30 | 0.25 | - | - | - | 0.05 | 0.15 | Rem | - |
3 | 4043 | 4.5-6.0 | 0.8 | 0.3 | 0.05 | 0.05 | - | - | 0.1 | - | 0.2 | - | 0.05 | 0.15 | Rem | - |
4 | 4047 | 11.0-13.0 | 0.8 | 0.3 | 0.15 | 0.1 | - | - | 0.2 | - | - | - | 0.05 | 0.15 | Rem | - |
5 | 5052 | 0.25 | 0.4 | 0.1 | 0.1 | 2.2-2.8 | 0.15-0.35 | - | 0.1 | - | - | - | 0.05 | 0.15 | Rem | - |
6 | 5754 | 0.4 | 0.4 | 0.1 | 0.5 | 2.6-3.6 | 0.3 | - | 0.2 | Mn+Cr:0.1-0.6 | 0.15 | - | 0.05 | 0.15 | Rem | - |
7 | 5182 | 0.2 | 0.35 | 0.15 | 0.20-0.50 | 4.0-5.0 | 0.1 | - | 0.25 | - | 0.1 | - | 0.05 | 0.15 | Rem | - |
8 | 5083 | 0.4 | 0.4 | 0.1 | 0.40-1.0 | 4.0-4.9 | 0.05-0.25 | - | 0.25 | - | 0.15 | - | 0.05 | 0.15 | Rem | LF4 |
9 | 6061 | 0.40-0.8 | 0.7 | 0.15-0.40 | 0.15 | 0.8-1.2 | 0.04-0.35 | - | 0.25 | - | 0.15 | - | 0.05 | 0.15 | Rem | LD30 |
Alloy States | Thickness (mm) | Tensile strenght (Rm/Mpa) | Yield Strength (Rp0.2 Mpa) | Elongation A50(%) | Bending Radius |
5052 H32 | >0.20-0.50 | 210-260 | 130 | 5 | 0.5t |
>0.50-1.50 | 6 | 1.0t | |||
>1.50-3.00 | 7 | 1.5t | |||
>3.00-6.00 | 10 | 1.5t | |||
5052 H34 | >0.20-0.50 | 230-280 | 150 | 4 | 0.5t |
>0.50-1.50 | 5 | 1.5t | |||
>1.50-3.00 | 6 | 2.0t | |||
>3.00-6.00 | 7 | 2.5t | |||
5052 H36 | >0.20-0.50 | 250-300 | 180 | 3 | 1.5t |
>0.50-1.50 | 4 | 2.0t | |||
>1.50-3.00 | 5 | 3.0t | |||
>3.00-6.00 | 6 | 3.5t | |||
5052 H38 | >0.20-0.50 | 270 | 210 | 3 | - |
>0.50-1.50 | 3 | - | |||
>1.50-3.00 | 4 | - |