C28000 High Pressure Brass Pipe
Get Latest PricePayment Type: | L/C,T/T |
Incoterm: | FOB,CFR,CIF,EXW |
Min. Order: | 1 Ton |
Transportation: | Ocean,Land,Air,Express |
Port: | Qingdao Port,Tianjin Port,Shanghai Port |
Payment Type: | L/C,T/T |
Incoterm: | FOB,CFR,CIF,EXW |
Min. Order: | 1 Ton |
Transportation: | Ocean,Land,Air,Express |
Port: | Qingdao Port,Tianjin Port,Shanghai Port |
Species: Straight Copper Pipe, Pancake Coil Copper Pipe, Capillary Tube
Application: Water Tube, Air Condition Or Refrigerator, Water Heater, Oil Cooler Pipe
Whether Alloy: Non-Alloy
Place Of Origin: China
Processing Service: Bending, Decoiling, Welding, Punching, Cutting
Standard: ASTM
ASTM: B135
Material: Brass
Thickness: 0.5mm-12mm
Length: 1m-6m
Diameter: 3mm-165mm
Selling Units | : | Ton |
Package Type | : | Standard export seaworthy package or as required. |
The file is encrypted. Please fill in the following information to continue accessing it
C28000 contains 59% Copper, also known as daily Brass. The price is the cheapest, the strength and hardness are high and the plasticity is poor, but it can still withstand pressure processing well in hot state, and its corrosion resistance is average, and other properties are similar to C27400.
The copper content of C28000 brass is 59%. The strength and hardness of this material are relatively high, but the plasticity is relatively poor. When it is used, it can withstand pressure processing only when it is heated, and its corrosion resistance is average.
C28000 Brass tube has good mechanical properties, good plasticity in both hot and cald conditions, can be used for brazing and welding, and is corrosion-resistant, but it is prone to corrosion cracking after corrosion. It is a common brass material for electrical appliances.
C28000 Brass Pipe is a kind of daily brass, which is relatively cheap and is generally used to make machine parts, welding parts, hot stamping and hot binding parts, etc. It is also suitable for hardware, mounting rails, switches, washers, gaskets, batteries, etc., and can also be made into decorative necklaces, bracelets, rings and other copper products;
Product Introduction | ||||||||||||||
C28000 is the cheapest brass with high strength, hardness, and good plasticity. It can withstand pressure processing well in the hot state, and has general corrosion resistance. Other properties are similar to those of C27400. | ||||||||||||||
Properties of C28000 copper: | "1. C28000 brass has beautiful color and good technological and mechanical properties, 2. High electrical and thermal conductivity, 3. It is resistant to corrosion in the atmosphere, fresh water, and seawater, easy to cut and polish, good weldability, and inexpensive. " | |||||||||||||
Use of C28000 copper: | It can be used for various deep drawing and bending parts, such as pins, rivets, washers, nuts, conduits, barometer springs, screens, radiator parts, etc. | |||||||||||||
Mechanical properties: | "Tensile strength σ b (MPa):≥294 Elongation δ 10 (%):≥25 Note: Tensile mechanical properties of plates Sample size: thickness 0.5~15" | |||||||||||||
technical parameter | ||||||||||||||
Thickness: | 0.05-2.0mm | |||||||||||||
Width: | 10-495mm | |||||||||||||
Executive standards: | GB /T 5231-2012-H59 | |||||||||||||
ASTM | ASTM-60Cu-40Zn | |||||||||||||
EN | EN-CuZn40 | |||||||||||||
DIN | DIN EN/DIN-CuZn40 | |||||||||||||
Typical Products | Rivets, washers, nuts | |||||||||||||
Chemical element content (%) | ||||||||||||||
composition | Fe | Cu | Pb | Zn | ||||||||||
MOQ | - | 57 | - | 38.2 | ||||||||||
Maximum | 0.3 | 60 | 0.5 | 43 | ||||||||||
Comparison Table | ||||||||||||||
Japan | USA | CHIINA | ISO | Germany | EN | Russia | ||||||||
JIS | ASTM | UNS | GB | ISC | ISO | Digital brand | DIN EN/DIN | W-Nr. | EN | Digital brand | GOST | |||
C2800 | 60Cu-40Zn | C28000 | H59 | T28200 | CuZn40 | C28000 | CuZn40 | C28000 2.036 | CuZn40 | CW509L | Л60 |