Best Quality 5083 Aluminum Coil
Get Latest PricePayment Type: | L/C,T/T |
Incoterm: | FOB,CFR,CIF,EXW |
Min. Order: | 5 Ton |
Transportation: | Ocean |
Port: | Tianjin Port,Qingdao Port,Shanghai Port |
Payment Type: | L/C,T/T |
Incoterm: | FOB,CFR,CIF,EXW |
Min. Order: | 5 Ton |
Transportation: | Ocean |
Port: | Tianjin Port,Qingdao Port,Shanghai Port |
Place Of Origin: China
Whether Alloy: Is Alloy
Material: 5000 Series
Surface Treatment: Coated
Annealed State: O - H112
Tolerance: ±1%
Processing Service: Bending, Decoiling, Welding, Punching, Cutting
Model NO.: 6 series, 6061 6083
Surface Treatment: Powder Coating
Technique: Cold Drawn
Customized: Yes
Application: Transportation Tools, Door & Window, Glass Wall, Heat Sink, Decorations
Selling Units | : | Ton |
Package Type | : | Wood Package, Transportion by Container |
The file is encrypted. Please fill in the following information to continue accessing it
5083 Aluminum Coil is an alloy of aluminum with magnesium, manganese, and chromium. It is commonly used in marine applications due to its high corrosion resistance and strength. It is also used in aerospace, transportation, and structural applications. The coil is available in various thicknesses and widths and can be custom cut to fit specific needs. It is often used in the construction of boats, ships, and other marine vessels, as well as in the manufacture of aircraft and other transportation vehicles.
5000 series Aluminum Alloy Coil with Mg added, has lower density, higher tensile strength and high elongation. It can also be hardened by cold work, it is widely used for marine industry and aviation industry.
No. | Alloy States | |||||||||||||||
Chemical composition.% | ||||||||||||||||
Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn |
| Ti | Zr | Other | AI | ||||
| Single | Total | ||||||||||||||
1 | 3003 | 0.6 | 0.7 | 0.05-0.20 | 1.0-1.5 | - | - | - | 0.1 | - | - | - | 0.05 | 0.15 | Rem | - |
2 | 4032 | 11.0-13.5 | 1 | 0.50-1.30 | - | 0.8-1.3 | 0.1 | 0.50-1.30 | 0.25 | - | - | - | 0.05 | 0.15 | Rem | - |
3 | 4043 | 4.5-6.0 | 0.8 | 0.3 | 0.05 | 0.05 | - | - | 0.1 | - | 0.2 | - | 0.05 | 0.15 | Rem | - |
4 | 4047 | 11.0-13.0 | 0.8 | 0.3 | 0.15 | 0.1 | - | - | 0.2 | - | - | - | 0.05 | 0.15 | Rem | - |
5 | 5052 | 0.25 | 0.4 | 0.1 | 0.1 | 2.2-2.8 | 0.15-0.35 | - | 0.1 | - | - | - | 0.05 | 0.15 | Rem | - |
6 | 5754 | 0.4 | 0.4 | 0.1 | 0.5 | 2.6-3.6 | 0.3 | - | 0.2 | Mn+Cr:0.1-0.6 | 0.15 | - | 0.05 | 0.15 | Rem | - |
7 | 5182 | 0.2 | 0.35 | 0.15 | 0.20-0.50 | 4.0-5.0 | 0.1 | - | 0.25 | - | 0.1 | - | 0.05 | 0.15 | Rem | - |
8 | 5083 | 0.4 | 0.4 | 0.1 | 0.40-1.0 | 4.0-4.9 | 0.05-0.25 | - | 0.25 | - | 0.15 | - | 0.05 | 0.15 | Rem | LF4 |
9 | 6061 | 0.40-0.8 | 0.7 | 0.15-0.40 | 0.15 | 0.8-1.2 | 0.04-0.35 | - | 0.25 | - | 0.15 | - | 0.05 | 0.15 | Rem | LD30 |
Alloy States | Thickness (mm) | Tensile strenght (Rm/Mpa) | Yield Strength (Rp0.2 Mpa) | Elongation A50(%) | Bending Radius |
5052 H32 | >0.20-0.50 | 210-260 | 130 | 5 | 0.5t |
>0.50-1.50 | 6 | 1.0t | |||
>1.50-3.00 | 7 | 1.5t | |||
>3.00-6.00 | 10 | 1.5t | |||
5052 H34 | >0.20-0.50 | 230-280 | 150 | 4 | 0.5t |
>0.50-1.50 | 5 | 1.5t | |||
>1.50-3.00 | 6 | 2.0t | |||
>3.00-6.00 | 7 | 2.5t | |||
5052 H36 | >0.20-0.50 | 250-300 | 180 | 3 | 1.5t |
>0.50-1.50 | 4 | 2.0t | |||
>1.50-3.00 | 5 | 3.0t | |||
>3.00-6.00 | 6 | 3.5t | |||
5052 H38 | >0.20-0.50 | 270 | 210 | 3 | - |
>0.50-1.50 | 3 | - | |||
>1.50-3.00 | 4 | - |